CONE BOTTOM TANKS

FEATURES

Available in 30°, 45°, and 60° slopes, sizes range from 15-13,000 gallons.
Material options for a diverse range of application requirements.
High-density linear polyethylene (HDLPE)*- black and natural white color - complies with FDA Regulation 177.1520 and NSF/ANSI 61 standards.
Cross-linked, high density polyethylene (XLPE) - black and natural white color.
Most tanks available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems.
Specific gravity ratings are based on the industry's most severe calculation.
Standard specific gravity choices are 1.5 and 1.9, other ratings are available upon request.
All materials are UV stabilized for long-term outdoor service.
Maximum operating temperature recommended for Cone Bottom tanks is 100 degrees F.

SPECIFICATIONS

NOTE: Dimensions listed below and on drawings may vary +/- 3% (standard Molding tolerance). Tank dimensions may vary depending on manufacturing location - please contact factory for drawing specific to the F.O.B. location. Specifications Subject to Change Without Notice.

part number	description	capacity (gal)	cone slope (deg)	diameter (in)	height w/ stand (in)	f.o.b.
1520000N--	Cone Bottom Open Top w/ Cover	15	45	17	38	L
1520001N--	Cone Bottom Open Top w/ Cover - No Sump	15	45	17	38	L
1850000N--	Cone Bottom	17	60	19	34	L
32223	Cone Bottom	30	30	27	42	S X L
1580000N--	Cone Bottom	35	30	30	34	L
32419	Cone Bottom	60	30	30	51	S X L
1560000N--	Cone Bottom	65	30	30	41	L
32468	Cone Bottom (no stand available)	85	30	30	39	S
6070000N--	Cone Bottom	110	30	30	56	L
32053	Cone Bottom (no stand available)	110	45	30	50	S
32101	Cone Bottom	150	45	36	50	S X L
1560400N--	Cone Bottom w/ Poly Stand	225	30	48	54	S
1560500N--	Cone Bottom w/ Poly Stand	325	30	48	66	S
6190000N--	Cone Bottom	500	45	64	80	L
1890000N--	Cone Bottom	1000	30	86	81	L
1890000N--	Cone Bottom w/ Poly Stand	1000	30	86	77	C
5000000N--	Cone Bottom	1000	45	64	120	L
1900000N--	Cone Bottom	1400	30	86	94	L
1900000N--	Cone Bottom w/ Poly Stand	1400	30	86	90	C
5010000N--	Cone Bottom	1500	45	64	158	L
1910000N--	Cone Bottom	1650	30	86	110	L
1910000N--	Cone Bottom w/ Poly Stand	1650	30	86	106	C
5070000N--	Cone Bottom	2000	30	90	125	L
5110000N--	Cone Bottom	2500	30	90	148	L
8350000N--	Cone Bottom	2500	30	95	125	C
5100000N--	Cone Bottom	2600	45	90	160	L
5150000N--	Cone Bottom	3000	30	90	167	L
8360000N--	Cone Bottom	3000	30	95	144	C
8050000N--	Cone Bottom	3600	15	102	135	M
5440000N--	Cone Bottom	3900	30	90	203	L
5180000N--	Cone Bottom	4100	45	90	216	L
5200000N--	Cone Bottom	4400	30	90	222	L
8050100N--	Cone Bottom	4600	15	102	164	M
8050200N--	Cone Bottom	5000	15	102	176	M
7040000N--	Cone Bottom	5500	30	90	255	L
5280200N--	Cone Bottom	6000	30	142	159	L
7180000N--	Cone Bottom	6500	30	90	296	L
5320100N--	Cone Bottom	7400	30	142	179	L
5340100N--	Cone Bottom	11,500	30	142	238	L
7490100N--	Cone Bottom	13,000	30	142	260	L

SMALL CONE TANK STANDS

part number	description
48900	15 Cone Stand
48400	17 Cone Stand
48600	35, 65, 110 Cone Stands
63932	150 Cone Stand

STEEL CONE TANK STANDS

NOTE: All steel stands are powder coated or painted black. Seismic stands must be ordered if siesmic restraints are required. If no siesmic tie down system is required, standard stand can be used. Seismic systems are not available for 95" and 102" diameter Cone Tanks, 5500 & 6500 gallon 90" diameter Cone Tanks and Tanks with polyethylene stands.

standard part number	siesmic part number	cone slope (deg)	tank diameter (in)	recommended tank capacity (in)
1003000C97801	N/A	30	86	1000, 1400, 1650 (FOB C only)
79000000	79000000	30	86	500, 1000 (FOB L only)
79000000	78900000	30	86	1400, 1650 (FOB L only)
79300000	79300000	30	90	2000, 2500, 3000
79300000	79800000	30	90	3900 - 4400
79300000	N/A	30	90	5500, 6500
78401000	N/A	30	95	1250, 1600, 2500, 3000
48500000	N/A	15	102	3600, 4600, 5000
79500000	79500000	30	142	6000, 7400
79500000	79500100	30	142	11,500, 13,000
78800000	78800000	45	64	500, 1000, 1500 (1.6 SG)
78800000	78801000	45	64	1500 (1.6 SG)
79400000	79400000	45	90	2600
79400000	79900000	45	90	4100

TOTAL DRAIN TANKS

NOTE: * High-density linear polyethylene (HDLPE) - black and natural white colors. These tanks must be ordered with the plastic stands listed directly below - no exceptions. Drawings shown with 12" stands but are available with either 12" or 18" stands, except for the 850 which is available with the 12" stand only. All Total Drain tanks above are rated for 1.9 Specific Gravity except the 550 gallon size is limited to 1.7 Specific Gravity, and the 850 gallon size is limited to 1.1 Specific Gravity.

part number	capacity (gal)	cone slope (deg)	nominal diameter (in)	nominal height (in)	f.o.b.
1800501N45 *	550	10 - 15	48	82	M
1810301N45 *	850	10 - 15	48	126	M
5680001N45	60	10 - 15	22	42	M
5690101N45	90	10 - 15	30	43	M
5700101N45	120	10 - 15	30	54	M
5710101N45	150	10 - 15	30	64	M
5720101N45	200	10 - 15	36	60	M
5730101N45	250	10 - 15	36	72	M
5740101N45	275	10 - 15	42	63	M
5750101N45	330	10 - 15	42	72	M
5760101N45	360	10 - 15	48	64	M
5770101N45	440	10 - 15	48	74	M
5780101N45	500	10 - 15	48	82	M

PLASTIC STANDS

NOTE: Tanks available in 1.5, and 1.9 Specific Gravity in HDLPE and XLPE materials. Contact factory for availability.

part number	nominal diameter (in)	nominal bottom clearance (in)	f.o.b.
1370000N--	22	22	M
1370001N--	22	18	M
1690000N--	30	12	M
1690001N--	30	18	M
1730000N--	36	12	M
1730001N--	36	18	M
1750000N--	42	12	M
1750001N--	42	18	M
1760000N--	48	12	M
1760001N--	48	18	M

Call Toll Free

Call Direct

Email Us

CONE BOTTOM TANKS

FEATURES

SPECIFICATIONS

SMALL CONE TANK STANDS

STEEL CONE TANK STANDS

TOTAL DRAIN TANKS

PLASTIC STANDS

LET'S GET IN TOUCH

Call Us

Email Us

QUICK LINKS

RESOURCES

SHOP